Well I've had my headlights for awhile now. Well I finally got around to taking them apart and cleaning them out. So I followed the headlight renwal steps we have here in the Acura section. But for some reason the headlight looks kinda clouded now. I only did the left driver side one, cause that's the one that needed to be cleaned. So I was wondering if you guys could help me out on what I can do to fix this problem. I'll post pics of the process and the outcome of the headlight. Thanks again.
Chemical Reaction... There was a Chemical Reaction that was Caused Due to a Unclean Applicator (Rag, Brush, etc) you can correct this by Using the Smallest Amount (Dab) of Paint Thinner on a CLEAN Applicator, the Cloudness Should Just Wipe Away. Happened to My Silvia Center Peice... Please do not Over Use Paint Thinner.
Well here are the pics. Hopefully you guys can see the difference in the headlights. This is before. One Eye uke: 400 degrees for only 5 minutes. You can smell he freshness. Once out of the oven. There was this white stuff in the inside of the fog light. After 400 Grit After 600 After 1000 After 1500 The Finished product. Sorry about the pic. You really cant tell the difference here. I'll get better ones later on tonight. Thanks for the input. Am going to try the suggestions you guys gave me.