crank bolt help

Discussion in 'Accord' started by ddwilliams83, Nov 15, 2009.

  1. ddwilliams83

    ddwilliams83 New Member

    Start a Conversation
    Joined:
    Nov 15, 2009
    Messages:
    2
    Likes Received:
    0
    ineed to see if anyone has had problems removing the crank pulley bolt on a 00 accord it stuck and i cant get it out even with my 3/4 impact any ideas thanks
     
    #1
    ddwilliams83, Nov 15, 2009
  2. Specter

    Specter New Member

    Start a Conversation
    Joined:
    Apr 28, 2006
    Messages:
    1,658
    Likes Received:
    12
    PB Blaster and wait a few hours for it to soak in
     
    #2
    Specter, Nov 15, 2009
  3. ddwilliams83

    ddwilliams83 New Member

    Start a Conversation
    Joined:
    Nov 15, 2009
    Messages:
    2
    Likes Received:
    0
    soaked it for two days with pb and my impact hammers 950ft lbs of torquei even had a mobil service guy come over and he broke three of his tool with no success i need to get it out so i can fix my oil leak
     
    #3
    ddwilliams83, Nov 15, 2009
  4. Nachtmensch

    Nachtmensch New Member

    Start a Conversation
    Joined:
    Apr 28, 2006
    Messages:
    3,920
    Likes Received:
    16
    if you can, put the trans in gear, and leave the tires on the ground (or someone applying the brakes if you are on stands), and use a breaker bar (1/2" sockets, not 3/8")

    should come loose.
     
    #4
    Nachtmensch, Nov 15, 2009

Share This Page