1992-1996 Honda Prelude EDM factory parts, options and specs

This thread shows various EDM specs, parts and factory options for the 1992-1996 Honda Prelude. Some items shown here are also JDM, USDM and other markets.

Please feel free to post any info or photos you want.

Exterior Specifications - Headlights



^^^ 2-piece black housing headlights. STANLEY.


^^^ black border housing corner lights. STANLEY.



^^^ 2-piece chrome housing headlights. STANLEY. Notice the
chrome arches in the housing? The USDM stock headlights are different.
Look below for comparison...


^^^ These are USDM. No chrome arches like EDM.


^^^ Some ludes in Europe (mostly Germany) had motorized height adjusting headlights (2-piece chrome or black housing).
This is the switch to control these headlights. It helps adjust the beam.
The switch fits in the center console, replacing one of the blanks.

^^^ Headlight Adjuster switch inside a console plate. 92-93 ludes.


^^^ Honda also offered this nifty little option. Headlight washers.
Here is a pic of the switch and the relay that controls the system.
The switch fits in the center console, replacing one of the blanks.



Exterior Specifications - Lighting


^^^ Amber Side Markers. STANLEY. All European Preludes came stock with these. *you will notice side markers on all Preludes in this thread.


^^^ Clear reflectors. STANLEY. 1994-96 models.
Since European Prelude had side markers there was no need to have the outer bumper lights utilize the blinking function. Instead, there were these outside clear reflectors. They were often combined with either all amber or amber/clear bumper lights.

^^^ *92-93 models had amber reflectors.

^^^Here is a pic of the reflectors. These are Genuine Honda.:tu:



^^^ More pics. Notice that there is no opening for the socket?




^^^Now here are the JDM clear cornering lights. These are a completely different cup of tea. I will get into these later. These do have a bulb and a socket, they illuminate the area to where you are turning.


^^^ USDM. In USA Preludes have rear bumper reflectors. In Europe that is not the case.


^^^ No rear bumper reflectors. EDM.




Exterior Specifications - Rear Fog Lights



^^^ 1992-1996 Honda Prelude EDM Rear Fog Light.

*Rear Fog lights are a requirement in Europe. The purpose of the rear fog
is to allow the visibility of your car to OTHER drivers in extreme conditions.



^^^ In UK the rear fog is on the right side of the rear bumper.


^^^In other countries like Germany for example, the rear fog is on the left side. Germany, Austria, Italy, France and many other countries have the steering wheel on the left side. Just like USA!!!
Only UK and some other Euro countries like Ireland and Scotland have the wheel on the right side like Japan.:tu:


Just to balance out the look, dual rear fogs.




^^^ EDM Rear Fog Switch. Fills the spot for where your usual USDM dimmer switch goes. Wondering what to do about the dimmer?
Don't worry. In Europe they had an alternate version dimmer that fits in
the center console. Check out the pic below.


^^^ EDM dimmer switch. Fits in the center console.


^^^ Rear Fog Light disassembled. Lens, Housing and Bracket.

 

Very Informative

Thankyou ... :interesting:

Do you have any more Information on EDM Preludes ???

Where can we Purchase these Parts ??? :wave:

 

he sales some of the stuff. ive gotten edm parts from him b4.

 

Yes, I have more information. I will post it in this thread. This is just the beginning.

You can purchase some specs on ebay. Most of the parts that I will be listing in this thread are very hard to find. I also sell some parts. edmfactory.4t.com

I hope everyone will enjoy this thread.

 

Interior Specifications - EDM coin pull out tray

Interior Specifications - EDM coin pull out tray, rare.
Also notice the coin holder? Yep, Europe had that too.

The in-dash spec, is a storage tray that pulls out from underneath the dash.















EDM spec accessories - Headlight Protectors





My friends Prelude. He is from Germany.

 

EDM cargo lights. Bottom corner of the door panels. Light up when the door is open. These allow people too see
the cargo area and the ground area at night. Clear ones (see pic.) are more common, the red ones are really rare.
These are Stanley, and a very rare feature in a 4th gen Prelude. Luxury option.





Here is one of the absolute hardest options to come by. EDM Hood Protector.
This is a Genuine Honda Factory part. Access option from Europe.

There is a possibility that this was also available on the AUDM market. Australia.






I have only seen this twice.

 

4th gen Prelude EL Gauges (Digital Clusters)

4th gen Prelude EL Gauges (Digital Clusters)


mph and Km/h. Goes up to 140 mph. Automatic cluster with shifter positions blacked out.




mph and Km/h. Goes a bit over 100 mph. Notice that Km/h gauge has lines instead of dots.




Km/h only! 4ws. vtec digital cluster. jdm. notes* in Japan there were vtec's w/4ws.



same as above, except it only goes to 180+ km/h.



mph and Km/h. vtec. Goes over 140 mph and a different redline from the 1st cluster in this post.




94-96 Si digital cluster. mph and km/h. Different redline.