im planning on going turbo with my zc zwap but the problem is im on a low budget but not too low, and i want to pull 11's or 12's out of it. what do sugest for me to do... any cheap sites or do it yourself tips would be great on parts to use
Help Well to put the Zc hatch in the 11's or 12's will be a challenge. As for the Turbo goes I would suggest that you put together your own kit. Thats what I did and I got alot more parts and it was cheaper then buying a DRAG or Rev Hard kit. I saved about $1000 and got more in parts. Hope thats helped.
yeah man thanks for the help i planned on doing something like that but finding sites for that isnt easy im already too used to b series so d series is like basically a new thing for me
http://thezcr.com/html/jnkyrdturbo.html I don't like to send you to another board for your info, BUT I found this for you, hope it helps!
To be honest you will probably not hit anywhere close to 11 or 12 seconds. I would predict mid 13's at most. Realisticly. Like JHMED said. i also do not like to refer people to other site for info. But since you are keen on doing it on a budget, here you go. http://www.homemadeturbo.com/ The site offers alot of info. Especially on turbong the ZC motor. Good Luck.:thumbup:
home made turbo :rocks: :rocks: :rocks: i learned to weld and make manifolds from there plus im learning how to chip and tune ECU's so half the work is done then all you need is a turbo (dsm would be fine)... will cost you little bit of money and you will have a fully tunable turbo system...
