so i just got a 96 hatch (midori green hsnap: build thread on the way) and i am looking to go ls/t and i was wondering if i could swap a b18a1 into it and if so what things i would need to get to make it work. any input would be appreciated.
the b18a will go in easy. get you some aftermarket mounts for a 99-00 si. you can use your stock mounts or stock si mounts but they are oil filled and they can bust its not pretty. but make sure you get the rear t bracket for the 99-00 si. the 94-01 integra t bracket will work in a eg but not an ek.
will need an obd2 dizzy or you can use obd1 with a jumper. any b series hydro trans will work. if your b18a1 has a trans with an intermediate shaft you can use that shaft but you have to use the 90-93 integra axles. if not then just make sure the intermediate shaft and axles match either all 90-93 or all 94-01.
need anything else let me know i currently have a 96 ex that i have a mild ls turbo set up on. 270whp but im not really feelin it for some reason so im gonna sell it.
thanks dude. so let me get this straight; i can use the dizzy off of the a1 if i use a jumper harness? would it be easier/cheaper if i got a new dizzy? i just want a cheap yet powerful dd and thought this would be the best route to go thanks man this shit is why i love this site
it would be easier to get an obd2 dizzy cause it will be plug and play. rywire.com has the dizzy jumper harness you will need im sure. is your motor obd1 or obd0?
yeah i was just trying to get all my facts straight for "just in case" purposes. thanks for all the help
