1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

SR Specs

Discussion in '240SX Silvia' started by Nachtmensch, May 1, 2006.

  1. Nachtmensch

    Nachtmensch New Member

    Start a Conversation
    Joined:
    Apr 28, 2006
    Messages:
    3,920
    Likes Received:
    16
    SR18DE

    Type: 1838cc EFI DOHC 16 valve 4cyl
    Power: 140hp @ 6400rpm
    Torque: 123ft-lbs @ 4800rpm
    Gearboxes: FWD 5-Speed
    Source: 92-93 Sunny GTS and Pulsar GTi (note bluebird version had only 93kW)


    SR20DE

    Type: 1998cc EFI DOHC 16 valve 4cyl
    Power: 160hp @ 6400rpm (145hp FWD)
    Torque: 138ft-lbs @ 4800rpm (178 FWD)
    Gearboxes: FWD 5-speed and RWD 5-speed and 4-speed auto
    Source: RWD 1993-94 Silvia Q's, FWD Presea


    S13 SR20DET

    Type: 1998cc DOHC 16 valve, chain driven cam sprockets
    Bore and stroke: 86mm x 86mm
    Compression: 8.5 : 1
    Horsepower: 205ps at 6000rpm
    Torque: 203 ft/lbs at 4000rpm
    Compressor: T-25, 60 trim 56mm BCI-1 compressor.
    Turbo: T-25, 62 trim 53.8mm 0.64 A/R turbine housing.
    Center Section: Journal bearings
    Gearboxes: RWD 5-Speed and 4-Speed Auto (1993-on Silvia and 180SX) 4WD east-west 5-Speed (GTi-R)
    Source: 1991-1995 Silvia K's and 180SX (redtop), 96-98 180sx (blacktop), 1991-92 Pulsar GTi-R 4WD


    S14 SR20DET

    Displacement: 1998cc (2.0 liter)
    Cam type: DOHC 16 valve, chain driven cam sprockets
    Bore and stroke: 86mm x 86mm
    Compression: 8.5 : 1
    Horsepower: 220hp at 6000rpm
    Torque: 203 ft/lbs at 4800rpm
    Compressor: T-28, 60 trim 60 mm BCI-1 compressor in T-04B housing
    Turbo: T-25, 62 trim 53.8mm 0.64 A/R turbine housing.
    Center Section: Ball Bearing
    Gearboxes: RWD 5-Speed
    Source: 1994-1998 S14 Silvia (black notch top)
    Variable valve timing system and a different turbo are the significant changes from the S13 SR20DET engines.


    S15 SR20DET

    Displacement: 1998cc (2.0 liter)
    Cam type: DOHC 16 valve, chain driven cam sprockets
    Bore and stroke: 86mm x 86mm
    Compression: 8.5 : 1
    Horsepower: 250ps at 6000rpm
    Injector size: 480cc/min
    Compressor: T-28, 60 trim 60 mm BCI-1 compressor in T-04B housing
    Turbo: Inconel turbine wheel. Cast divider wall between turbine discharge and wastegate.
    Center Section: Ball Bearing
    Gearboxes: RWD 6 Speed, Close Ratio
    Source: 1999+ S15 Silvia (black notch top)







    USDM Replacement Parts:

    Oil filter (S13 SR20DET)- 91-94 Sentra SE-R
    Oil filter (S14 SR20DET)- 95 Sentra SE-R
    Fuel Filter - 1990-1996 300ZX TT
    Upper injector o-ring - 7/95 and newer 300ZX TT (small/upper)
    Lower injector o-ring - 7/95 and newer 300ZX TT (big/lower)
    o2 sensor (S13 SR20DET REDTOP)- '87 280ZX
    o2 Sensor (S14 SR20DET BLACKTOP)- 95 300ZX TT
    Exhaust Manifold Gasket (Red Top)- 91-94 Sentra SE-R
    4 Hole Turbo Manifold gasket / 5 Hole Turbo Extension Gasket - 91-96 300ZX TT (Z32)
    Fuel Injectors - 91-96 Z32 300ZX TT (purple plugs; 370cc)
    MAF - 89-90 240SX
    Timing Chain Kit - 91 B13 Sentra SE-R
    Belts (PS, AC, alt) - Gates K050370 Alt., K040345 PS & most AC
    Spark Plugs - 91 Sentra SE-R
    Water Pump - JDM ONLY!
    Head Gasket - JDM ONLY!
    IACV Gasket - JDM ONLY!
    Engine Coolant Temp. Sensor - '91-94 B13 Sentra SE-R
    Throttle Position Sensor - '91-'94 B13 Sentra SE-R
    Water Temperature Sensor - Sentra (equal to year of you motor)
    Front and rear main seal(Red Top)- 93 sentra SER
    Stock sr clutch- 89 Nissan Maxima


    Nissan Part Numbers:

    Connecting Rod Bearing: 12111-1N500
    Crankshaft Bearing: 12207-60J00
    Front main seal: 13510-53J00
    Rear Main seal: 12279-0M300
    Piston Ring set: 12033-53J10
    Exhaust Manifold Gasket (S13): 14036-53J10
    Exhaust Manifold Stud: 14065-75F00
    Intake Manifold Gasket (S14): 14035-5U000
    Intake Manifold Gasket (S13): 14035-53J00
    Oil Strainer Gasket: 15053-1E400
    Intake Valve: 13201-1E711
    Exhaust Valve (Not found at Nissan): 13202-53J01
    Shim: 13229-53J00
    Tensionner Gasket: 13079-2J200
    Intake Valve Seal: 13207-84A00
    Exhaust Valve Seal: 13207-53F00
    Intake/Exhaust Valve Seats: 13205-53J00
    Valve cover gasket (S13): 13270-52F00
    Spark Plug Well Gasket: 13271-52F00

    thanks to club240sx.com, wikipedia, and zilvia.net :)
     
    #1
Similar Threads: Specs
Forum Title Date
240SX Silvia CA Specs May 1, 2006
240SX Silvia General 240sx/Silvia Specs May 1, 2006

Share This Page