Subaru

BG5 coil on plug conversions

invalid@example.com (403legacy) — Tue, 13 Jun 2017 22:52:39 +0000

I've been doing some updating on my 1995 Legacy GT-B. I'm now trying to do the coil on plug conversion. so the premise is that I swap out the two pin coil packs and install three pin 2002 WRX coil packs I have them wired at the packs but now I'm stumped as to by passing the ignition control module. my engine code is ej20H we have been translating the Japanese wiring diagram but to no avail. any tips are very welcome.

JDM Engine Parts

invalid@example.com (mv 1411) — Fri, 09 Dec 2016 05:59:09 +0000

In JDM Engine, we can provide all types of engines. Used JDM Engine offers quality used JDM engines and transmissions. We carry all JDM engines like JDM Honda, JDM Nissan, JDM Toyota, JDM Mazda, JDM Mitsubishi, JDM Subaru Engines. If there are any JDM motors that you do not see on the site please do not hesitate to either email or call us and we can likely locate the JDM motor you are looking for. Here is the way , you can visit usedjdmengine.com...

JDM Engine Parts

Subaru Impreza Picture Thread

invalid@example.com (Daniel) — Tue, 25 Jun 2013 01:46:50 +0000

Pics of the 2006 Subarue Impreza WRX Sti from last November. Sorry that I just got around to posting these. A little slow here.

Subaru Legacy Pic Thread

invalid@example.com (97-ferio) — Fri, 05 Jun 2009 22:40:39 +0000

I deleted my original thread post because I didn't notice it had already been stickied. lol.:roflmao: anway, I've been a big fan of the classy Subaru Legacy ever since I lived in Japan, so here is my tribute thread to the Subie Legacy.

View attachment 8566
^^this one looks like a newer version of dbendel's car.

View attachment 8567

....hopefully we can keep this thread going. :thumbup:
View attachment 8566 View attachment 8567

Any other Legacy owners out there

invalid@example.com (JDM B4) — Fri, 05 Jun 2009 13:59:55 +0000

Are there any other Legacy B4 twin turbo owners here..

View attachment 18435

" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="425"...

Any other Legacy owners out there

ken blocks gymkhana sequel

invalid@example.com (Thrule01) — Mon, 01 Jun 2009 21:38:37 +0000

" type="application/x-shockwave-flash" allowfullscreen="true" width="425" height="344">

ken blocks gymkhana sequel

12.91 1/4 mile

invalid@example.com (IMPREZANETICS) — Sat, 10 Jan 2009 16:36:57 +0000

stock td05 turbo 15 psi racing c16 fuel ecu untuned against a jdm evo 3

12.91 1/4 mile

2 step launch control

invalid@example.com (IMPREZANETICS) — Sat, 10 Jan 2009 16:33:45 +0000

hey guys

i have the apexi power fc but i don't think i can upload a launch control with the datalogit (did not try it yet) if not what kind of 2 step launch control could i buy??? and would not interfere with the power fc

many thnx
derek

polyurethane transmission mount

invalid@example.com (IMPREZANETICS) — Wed, 03 Dec 2008 21:35:44 +0000

hamemade urethane transmission mount, made with urethane for windshields, it hold up pretty good!! :rocks:
View attachment 1118 View attachment 1119

PERFORMANCE Q

invalid@example.com (IMPREZANETICS) — Wed, 15 Oct 2008 01:10:54 +0000

i'm thinking of upgrading my turbo to a gt35 but they told me i have to upgrade my cams to!!! is that true???

thnx
derek

2009 STi Test Video

invalid@example.com (CLUTCHONE) — Tue, 14 Oct 2008 01:04:48 +0000

2009 Forester and WRX/STI Testing on courses

" type="application/x-shockwave-flash" allowfullscreen="true" width="425" height="349">

What Do You Think of the New STi???

oke:

2009 STi Test Video

jdm wrx

invalid@example.com (IMPREZANETICS) — Tue, 14 Oct 2008 01:02:11 +0000

ran 13.38 1/4 mile spinning #1 gear @ 14.7 psi

new pics
View attachment 1105 View attachment 1106 View attachment 1107 View attachment 1108 View attachment 1109

THINNER + GAS = RACING FUEL

invalid@example.com (IMPREZANETICS) — Sat, 10 May 2008 05:15:07 +0000

I HAVE A FRIEND THAT HAS A 2000 WRX WITH STOCK INTERNALS AND A SUPERZILLA 49 TURBO WITH 660 CC INJECTORS, AND A STAND ALONE TUNED! WITH WALBRO FUEL PUMP,... HE MIXES THIS THINNER CALLED "TOLUENE" COMES IN GALLON AND MIXES IT WITH HALF A TANK A GAS!! HE'S RUNNING 11'S SEC, 1/4 MILE, I HAVEN'T DONE IT YET, BUT I WILL NEXT MONTH

WEL HE DOES THIS CAUSE THE GAS HERE IN ARUBA IS REALLY BAD IT'S LIKE 89 TO 92 OCTANE

TURBO??!!?!?!?!?

invalid@example.com (IMPREZANETICS) — Sat, 10 May 2008 00:07:56 +0000

what kind of turbo would be good for my car??? i wanna upgrade it

1993 JDM WRX UPDATE

invalid@example.com (IMPREZANETICS) — Sun, 20 Apr 2008 17:01:43 +0000

back on track, with acl bearing, eagle h-beam rod, arias 8.5:1 comp. 92.5 bore, cometic head gasket, arp head studs, exotic speed headers and uppipe, td05 turbo, invidia catless 3'' exhaust, apexi power fc still need to be tuned, getting a walbro 255 lph end of this month

does anyone know how to tune the power fc?? or give me some basic info

1993 JDM WRX UPDATE

1993 jdm wrx ej20g ecu???!!!

invalid@example.com (IMPREZANETICS) — Fri, 21 Mar 2008 20:45:58 +0000

HI does anyone know what kind of ecu should i get for my wrx? i was thinking apexi powerfc with commander it's plug and play, i don't know if there a better one for my car, or does anyone have one of those for sale

ENGINE REBUILD

invalid@example.com (IMPREZANETICS) — Mon, 04 Feb 2008 03:21:17 +0000

FINALLY GOT THE BEARINGS AND HEAD STUDS, :rocks: :woot: MY HEADS ARE STILL AT THE SHOP, I WILL UPDATE ASAP
View attachment 1048 View attachment 1049 View attachment 1050 View attachment 1051 View attachment 1052 View attachment 1053

Parts for an Impreza 2.5i

invalid@example.com (ImprezaSTi452) — Wed, 30 Jan 2008 23:24:37 +0000

Hey everyone. I'm looking into getting some info on parts for my '07 Impreza 2.5i. I've been looking around, but come up with nothing so far. I've even looked through Subaru's parts catalog. My question would then be this: Would intake/exhaust parts for a WRX fit on my car? I know that there is a difference in the manifolds because of the turbo, but I'm just looking for the cold air intake and cat-back exhausts. Any info would be a big help.

Also, I just moved up to NH (Manchester...

Parts for an Impreza 2.5i

NO MORE STOCK INTERNALS :p

invalid@example.com (IMPREZANETICS) — Tue, 22 Jan 2008 00:55:26 +0000

OK SO I DESIDED TO BUY ARIAS PISTON AND EAGLE ROD FOR MY WRX, ARIAS PISTON IS 92.5 8.5:1 COMP. AND THE EAGLE ROD IS H-BEAM, HOW MUCH PSI YOU GUYS THINK THIS WILL HANDLE??????? I ALSO REBORED MY CYLINDER BLOCK AND POLISHED MY KRANK, NOW I HAVE ACL BEARINGS AND ARP HEAD STUDS COMING!!

THNX
DEREK
View attachment 1023 View attachment 1024

Potential buyer

invalid@example.com (Leonhart S14) — Thu, 27 Dec 2007 17:43:39 +0000

My brother is gettin his drivers lisence soon, and i will be giving him my baby (05 Scion tC). i fell in love with subarus a few years ago, the body, the sound of the flat 4 with a nice turboback, the whole image....just sexy. Anyways, im going to be in the market for one. My preferences, in order are as follows:
1. 04-05 STi
2. 06-07 STi
3. 05-? Legacy GT Spec B
4. 04-05 WRX
5. 06-07 WRX
I dont plan to do much modification, that is why i am opting for the STi, coming out of the factory...

Potential buyer